Zanussi ZHP9022X ユーザーズマニュアル

•  The filters must be cleaned every 2 months, or more

frequently  in  case  of  particularly  heavy  use  of  the

hood. Filters can be washed in a dishwasher.

•  Pull out the sliding suction panel.

•  Remove the filters one by one, after having discon-

nected the relative fastening elements.

•  Wash  the  filters,  taking  care  not  to  bend  them.  Let

them get dry before refitting them. (The colour of the

filter surface may change throughout the time but this

has no influence to the filter efficiency).

•  When refitting the filters, make sure that the handle

is visible on the outside.

•  Close the sliding suction panel.

•  These filters are not washable and cannot be rege-

nerated, and must be replaced approximately every

four months or more frequently by particularly heavy

use.

•  Pull out the sliding suction panel.

•  Remove the grease filters.

•  Remove the saturated carbon filter by releasing the

fixing hooks.

•  Replace the grease filters.

•  Close the sliding suction panel.

•  Remove the metal terminals fixing the light cover.

•  Slide the light cover to the right until the left hand is

free.  Lower  it  slightly  and  slide  it  to  the  left  to  free

it completely.

•  Unscrew the bulbs and replace them with new ones

having the same characteristics.

•  Replace the lighting support in reverse order.