Zanussi ZDT25001FA ユーザーズマニュアル

Press and hold simultaneously 

 and 

 until the appliance is in programme selection mode.

With this function you can cancel the running programme or the delay start.

While the appliance is in programme selection mode:
1. Press and hold 

 and 

 .

• The indicators 

, 

 and 

 starts to flash.

In user mode can be changed:
• The level of the water softener according to the water hardness.

• The activation or the deactivation of the acoustic signal for end of programme.
These settings will be saved until you change them again.

While the appliance is in user mode:
1. Press 

 .

• The indicators 

 and 

 goes off.

• The indicator 

 starts to flash.

• The current setting is indicated by the number of flashes of the indicator 

 (e.g. 5 flashes +

pause + 5 flashes = level 5).

2. Press 

 to change the setting. Each time you press 

 , the level increases. After level 10

you will start again from level by 1.