Справочник Пользователя для Zanussi ZDT25001FA
CANCEL FUNCTION
Press and hold simultaneously
and
until the appliance is in programme selection mode.
With this function you can cancel the running programme or the delay start.
USER MODE
While the appliance is in programme selection mode:
1. Press and hold
1. Press and hold
and
.
• The indicators
,
and
starts to flash.
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The level of the water softener according to the water hardness.
• The activation or the deactivation of the acoustic signal for end of programme.
These settings will be saved until you change them again.
These settings will be saved until you change them again.
ADJUSTING THE WATER SOFTENER
x5
x6
While the appliance is in user mode:
1. Press
1. Press
.
• The indicators
and
goes off.
• The indicator
starts to flash.
• The current setting is indicated by the number of flashes of the indicator
(e.g. 5 flashes +
pause + 5 flashes = level 5).
2. Press
to change the setting. Each time you press
, the level increases. After level 10
you will start again from level by 1.
7