Zanussi ZRG15807WA ユーザーズマニュアル

5. Unscrew and install the screw on the

opposite side.

6. Install the hinge on the opposite side.

7. Screw the right foot.

8. Unscrew the screws of the door top hinge.

9. Remove the hinge. Put over the pin in the

direction of the arrow. Install the hinge on

the opposite side.

10. Tighten the hinge.

11. Put the top in position.

12. Push front the top.

13. Screw both screws on the rear side.

14. Remove and install the handle on the

opposite side.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the

cabinet.

• The door opens and closes

correctly.

If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit

perfectly to the cabinet. In that case,

wait for the natural fitting of the

gasket.

In case you do not want to carry out

the above mentioned operations,

contact the nearest Authorised

Service Centre. The Authorised

Service specialist will carry out the

reversibility of the doors at your cost.