Zanussi ZBA22421SA ユーザーズマニュアル

Refer to Safety chapters.

The equipment has to be cleaned regularly:
• clean the inside and accessories with

lukewarm water and some neutral soap.

• regularly check the door seals and wipe

clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.

Do not pull, move or damage any

pipes and/or cables inside the

cabinet.

Never use detergents, abrasive

powders, highly perfumed cleaning

products or wax polishes to clean

the interior as this will damage the

surface and leave a strong odour.

Take care of not to damage the

cooling system.

Clean the condenser and the compressor at the

back of the appliance with a brush. This

operation will improve the performance of the

appliance and save electricity consumption.

Before using the appliance for the first time,

wash the interior and all internal accessories

with lukewarm water and some neutral soap so

as to remove the typical smell of a brand-new

product, then dry thoroughly.

Do not use detergents or abrasive

powders, as these will damage the

finish.

Frost is automatically eliminated from the

evaporator of the refrigerator compartment

every time the motor compressor stops, during

normal use. The defrost water drains out

through a trough into a special container at the

back of the appliance, over the motor

compressor, where it evaporates.
It is important to periodically clean the defrost

water drain hole in the middle of the refrigerator

compartment channel to prevent the water

overflowing and dripping onto the food inside.

Never use sharp metal tools to

scrape off frost from the evaporator

as you could damage it.

A temperature rise of the frozen food

packs, during defrosting, may

shorten their safe storage life.

Do not use a mechanical device or

any artificial means to speed up the

thawing process other than those

recommended by the manufacturer.

A certain amount of frost will always form on the

freezer shelves and around the top

compartment.
Defrost the freezer when the frost layer reaches

a thickness of about 3-5 mm.
1. Pull out the plug from the wall socket or

switch off the appliance.

2. Remove any stored food, wrap it in several

layers of newspaper and put it in a cool

place 

Do not touch frozen goods with

wet hands. Hands can freeze to

the goods.

3. Open the door. 

In order to speed up the defrosting process,

place a pot of warm water in the freezer

compartment. In addition, remove pieces of