Zanussi ZBA22421SA ユーザーズマニュアル

ice that break away before defrosting is

complete.

4. When defrosting is completed, dry the

interior thoroughly.

5. Switch on the appliance.

6. Set the temperature regulator to obtain the

maximum coldness and run the appliance

for two or three hours using this setting.

7. Reload the previously removed food into the

compartment.

When the appliance is not in use for long

periods, take the following precautions:

• Disconnect the appliance from

• Remove all food

• Defrost (if foreseen) and clean the appliance

and all accessories

• Leave the door/doors open to prevent

unpleasant smells.

If the cabinet will be kept on, ask

somebody to check it once in a

while to prevent the food inside from

spoiling in case of a power failure.

Refer to Safety chapters.

The appliance does not operate.

The appliance is switched off.

Switch on the appliance.

 

The mains plug is not connec-

ted to the mains socket cor-

rectly.

Connect the mains plug to the

mains socket correctly.

 

There is no voltage in the

mains socket.

Connect a different electrical appli-

ance to the mains socket. Contact

a qualified electrician.

The appliance is noisy.

The appliance is not supported

properly.

Check if the appliance stands sta-

ble.

The compressor operates contin-

ually.

Temperature is set incorrectly.

Refer to "Operation" chapter.

 

Many food products were put

in at the same time.

Wait some hours and then check

the temperature again.

 

The room temperature is too

high.

Refer to climate class chart on the

rating plate.

 

Food products placed in the

appliance were too warm.

Allow food products to cool to

room temperature before storing.

Water flows inside the refrigera-

tor.

The water outlet is clogged.

Clean the water outlet.

Food products prevent that

water flows into the water col-

lector.

Make sure that food products do

not touch the rear plate.