Bosch BGS 42230 ユーザーズマニュアル

39

a)  Telescopic tube without accessory connection:

   To release the connection, turn the handle slightly 

and pull it out of the telescopic tool. 

b)  Telescopic tube with accessory connection:

   To release the connection, press the locking collar 

on the telescopic tube and and pull out the handle.

a)  Nozzle without accessory connection:

   To release the connection, turn the telescopic tube 

slightly and pull it out of the floor nozzle.

b)  Nozzle with accessory connection:

   To release the connection, press the locking collar 

and pull the telescopic tube out of the floor nozzle.

In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after every 
use or, at the latest, when dust in the dust container 
has reached the marking at any point.

   The dust container can only be removed when the 

appliance is in a horizontal position. Therefore, 
place the appliance on the floor to unlock the re-
lease button.

a)  Press the release button and pull the dust container 

out of the appliance using the handle.

b)  Remove the lid from the dust container and empty 

the dust container. 

c)  Put the lid back on the dust container.

d)  Remove any dirt which may have been lodged under-

neath the container ejector opening.

e)  Insert the dust container in the appliance, so that it 

'clicks' audibly into place.

Your appliance is equipped with a Sensor Control indi-
cator. This function constantly monitors whether your 
vacuum cleaner is working at its optimum power level. 

 

The indicator (blue ring) flashes red when the foam fil-
ter needs to be cleaned. The appliance is automatically 
adjusted to the lowest power level.

Switch off the appliance.

a)  Open the lid of the foam filter by pulling on the lo-

cking lever.

b)  Remove the filter cartridge with foam filter using the 

tab.  
Remove the foam filter from the filter cartridge and 
tap out both parts. 

c)  If they are very dirty, the foam filter and filter cart-

ridge should be cleaned under running water.  
Alternatively, the unit can be cleaned in the 
washing machine at max. 30 °C using a gentle pro-
gramme and the lowest spin speed.  
TIP:  To protect other laundry items, put the filter 

unit into a laundry bag.

d) Allow the foam filter and filter cartridge to dry com-

pletely (at least 24 hours) and then reinsert the foam 
filter into the filter cartridge.

e) Insert the filter cartridge with foam filter back into 

the appliance. Close the lid of the foam filter.

  The lid will only close if a filter has been inserted.

The Sensor Control indicator also flashes after the 
foam filter has been cleaned:

 

•

Switch off the appliance.

a)  Hold the appliance lid by the recessed handle and 

open it.

b)  Unlock the cover by turning it anti-clockwise, and 

remove it from the appliance.

=>

= Remove the blockage from the collecting unit.

c) Put the cover back on and lock it in place by turning 

it clockwise.

=>

= Close the appliance lid.

If the Sensor Control indicator continues to flash red, 
check whether the nozzle, suction pipe or flexible hose 
are blocked. This can also trigger the Sensor Control 
indicator.

Depending on the model, your appliance is equipped 
with either a HEPA filter 

 

 or a micro filter 

 

.

Depending on the model, your appliance has additional 
sound insulation behind the HEPA or micro filter. This 
does not have to be cleaned.

You can determine with which HEPA filter your appli-
ance is equipped by looking at the imprint on the filter 
frame next to the reference number:

 

•

"washable" –  the filter can be washed.

 

•

No additional imprint – the filter must be replaced.

* Dependent on model