Cisco Cisco IOS Software Release 12.2(58)SE

ページ / 32
 
10
Release Notes for the Cisco Catalyst Blade Switch 3130 and 3032 for Dell, Cisco IOS Release 12.2(58)SE1
OL-24332-01
Limitations and Restrictions
Limitations and Restrictions
You should review this section before you begin working with the switch. These are known limitations 
that will not be fixed, and there is not always a workaround. Some features might not work as 
documented, and some features could be affected by recent changes to the switch hardware or software.
Cisco IOS Limitations
Auto Smartports Cisco-default and user-defined macros
12.2(50)SE
3130 and 3032
Support for IPv6 features in the IP base and IP services feature sets
12.2(50)SE
3130 and 3032
Voice aware IEEE 802.1x and MAC authentication bypass (MAB) security 
violation 
12.2(46)SE
3130 and 3032
Local web authentication banner
12.2(46)SE
3130 and 3032
Support for HSRP Version 2 (HSRPv2) 
12.2(46)SE
3130
Disabling MAC address learning on a VLAN
12.2(46)SE
3130 and 3032
PAgP Interaction with Virtual Switches and Dual-Active Detection, also referred 
to as enhanced PAgP
12.2(46)SE
3130 and 3032
Support for rehosting a software license and for using an embedded evaluation 
software license
12.2(46)SE
3130 and 3032
DHCP server port-based address allocation for the preassignment of an IP 
address to a switch port
12.2(46)SE
3130 and 3032
HSRP for IPv6
12.2(46)SE
3130
DHCP for IPv6 relay, client, server address assignment and prefix delegation 
12.2(46)SE
3130
IPv6 default router preference (DRP)
12.2(46)SE
3130 and 3032
Generic message authentication support with the SSH Protocol and compliance 
with RFC 4256. 
12.2(46)SE
3130 and 3032
Table 4
Features Introduced After the First Release and the Minimum Cisco IOS Release Required (continued)
Feature 
Minimum Cisco IOS 
Release Required 
Catalyst Blade 
Switch Support