Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) テクニカルリファレンス
Network Element Defaults
NTP-D164 Edit Network Element Defaults
2
Cisco ONS 15454 SDH Release 4.1 Network Element Defaults
78-15774-01
NTP-D164 Edit Network Element Defaults
Step 1
Log into CTC at the node where you want to edit NE defaults. Refer to the Cisco ONS 15454 SDH
Procedure Guide for login procedures.
Procedure Guide for login procedures.
Step 2
Click the Provisioning > Defaults Editor tabs.
Step 3
Under Defaults Selector, choose either a card (if editing card-level defaults) or NODE (if editing
node-level defaults). Clicking on the node name (at the top of the Defaults Selector column) lists all
available NE defaults (both node- and card-level) under Property Name.
node-level defaults). Clicking on the node name (at the top of the Defaults Selector column) lists all
available NE defaults (both node- and card-level) under Property Name.
Step 4
Locate a default you want to change under Property Name.
Step 5
Click in the Default Value column for the default property you are changing and either choose a value
from the drop-down menu (when available), or type in the desired new value.
from the drop-down menu (when available), or type in the desired new value.
Note
If you click Reset before you click Apply, all values will return to their original settings.
Step 6
Click Apply (click in the Property Name column to activate the Apply button if it is unavailable). You
can modify multiple default values before applying the changes.
can modify multiple default values before applying the changes.
A pencil icon will appear next to any default value that will be changed as a result of editing the defaults
file.
file.
Step 7
If you are modifying node-level defaults, a dialog box appears telling you that applying defaults for node
level attributes overrides current provisioning and asks if you want to continue. Click Yes.
level attributes overrides current provisioning and asks if you want to continue. Click Yes.
If you are modifying the IIOP Listener Port setting, a dialog box appears warning you that the node will
reboot and asks if you want to continue. Click Yes.
reboot and asks if you want to continue. Click Yes.
Note
Changes to node settings take effect when you click Apply. Changes to the IIOP Listener Port
setting reboots the TCC-I/TCC2. Changes made to card settings using the Defaults Editor do not
change the settings for cards that are currently installed or slots that are pre-provisioned for
cards. Card settings must be manually changed by opening the cards (or pre-provisioned card
slot). For procedures to change card settings, refer to the Change Card Settings chapter of the
Cisco ONS 15454 SDH Procedure Guide.
setting reboots the TCC-I/TCC2. Changes made to card settings using the Defaults Editor do not
change the settings for cards that are currently installed or slots that are pre-provisioned for
cards. Card settings must be manually changed by opening the cards (or pre-provisioned card
slot). For procedures to change card settings, refer to the Change Card Settings chapter of the
Cisco ONS 15454 SDH Procedure Guide.
Stop. You have completed this procedure.
Purpose
This procedure edits the NE defaults using the NE Defaults Editor. The
new defaults can either be applied only to the node on which they are edited
or exported to a file and imported for use on other nodes.
new defaults can either be applied only to the node on which they are edited
or exported to a file and imported for use on other nodes.
Tools/Equipment
None
Prerequisite Procedures None
Required/As Needed
As needed
Onsite/Remote
Onsite or remote
Security Level
Superuser only