Cisco Cisco Unified MeetingPlace Audio Server メンテナンスマニュアル

Verify your configuration by typing 

blade

 and pressing Enter.

Confirm the screen output is correct for your configuration.

Type 

x

 and press Enter to exit the “blade” command utility.

The following sections provide configuration instructions for example T1 PRI configurations:

This section explains how to use the “blade” command when configuring 736 T1 PRI ports.

If you do not already have terminal logging turned on, turn it on before proceeding. For information on 
logging, see the 

.

At the tech$ prompt, type 

blade -p 736

 and press Enter.

Confirm the “blade” command you entered and type 

y

 and press Enter. If you entered the wrong 

command, type 

n

 and press Enter, then re-enter the correct command.

The server responds by telling you how many ports it is configuring. When the tech$ prompt appears, it 
is complete. See 

.

Verify your configuration by typing 

blade

 and pressing Enter.

meetingplace:tech$ blade -p <# T1 PRI ports>

This will reset many DB tables, are you sure?  (y/n): y

 

Configuring “X” T1 PRI ports

Restart the system for changes to take effect

meetingplace:tech$

meetingplace:tech$ blade -p 736

This will reset many DB tables, are you sure?  (y/n): y

 

Configuring 736 T1 PRI ports

 

Restart the system for changes to take effect

meetingplace:tech$