Cisco Cisco Unified MeetingPlace Audio Server メンテナンスマニュアル
3-26
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Connecting the system cables
Figure 3-18 Front of 8112 Server with Cables Connected
One Multi Access Blade MA-16 card
To connect the E1 or T1 PRI telephony cables for one Multi Access Blade MA-16 card, follow these
steps:
steps:
Step 1
Locate the following Cisco Systems-supplied items:
•
E1 or T1 PRI telephony cables
•
breakout box (should already be mounted above the MeetingPlace server)
•
trunk card interface cable assemblies (50-pin Amphenol cables)
Step 2
Plug the first E1 or T1 PRI telephony cable into the customer-supplied RJ-48c socket.
Step 3
Plug the other end of the first E1 or T1 PRI telephony cable into the slot labelled 1 on the far left of the
front of the breakout box. Continue from left to right as needed. See
front of the breakout box. Continue from left to right as needed. See
Figure 3-19 Breakout Box, Front View