Cisco Cisco Unified MeetingPlace Audio Server メンテナンスマニュアル
4-75
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Using MeetingTime to configure ports
Using MeetingTime to configure ports
After a system restart, the LAN connection becomes active. Locate the MeetingTime media kit that was
included in the system box. Install MeetingTime on the System Manager’s PC. To install MeetingTime,
follow the directions included in the media kit.
included in the system box. Install MeetingTime on the System Manager’s PC. To install MeetingTime,
follow the directions included in the media kit.
This section describes how to use MeetingTime to complete system configuration. The MeetingPlace
Audio Server 5.2 System Manager’s Guide contains complete information about MeetingTime. For these
procedures, you need worksheets 4-5, 4-6, and 4-7 from the MeetingPlace Audio Server 5.2 Installation
Planning Guide. This procedure consists of transferring information from the worksheets to the
MeetingTime screens.
Audio Server 5.2 System Manager’s Guide contains complete information about MeetingTime. For these
procedures, you need worksheets 4-5, 4-6, and 4-7 from the MeetingPlace Audio Server 5.2 Installation
Planning Guide. This procedure consists of transferring information from the worksheets to the
MeetingTime screens.
Step 1
Double click the MeetingTime icon.
appears.
Figure 4-82 MeetingTime Login Dialog Box
Step 2
Enter your case sensitive user ID, your password, and the address or host name of the MeetingPlace
server. If you do not know your password, contact the Cisco TAC.
server. If you do not know your password, contact the Cisco TAC.
Step 3
.