Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch

ページ / 14
10
Release Notes for 200, 300, 500, and ESW2 Series Switches Firmware Version 1.2.9
Release Notes
Japanese language files version 1.1.1.6 and older are forward compatible up 
to Firmware version 1.1.2.0. For example: loading a version 1.1.1.6 language 
file onto a device running firmware version 1.2.7.76 and up will fail.
Japanese language files version 1.1.1.10 and newer are only compatible with 
firmware version 1.2.7.76 and newer.
The following defects are carried forward for the 200 and 
300 series switches:
Problem:
In Layer 3 mode, SNTP Broadcast can only be operated from the CLI.
Solution:
There is no workaround.
Problem:
The EEE operational status should become disabled when Auto 
Negotiation is disabled. (CQ132106 )
Solution:
When the speed on a port is 1 Gigabit, auto negotiation has no effect on 
the EEE functioning state.
Problem:
The Voice VLAN should be prevented from being set as Guest VLAN, 
and the user should receive a warning. This is not happening. (CQ132684)
Solution:
Avoid setting the Voice VLAN as guest VLAN and vice-versa.
Problem:
Copying configuration information from one port to another doesn't 
copy all the settings:
-
On the Security > Port Security page, Trap and Trap Frequency fail to 
copy when port security settings are copied from one interface to other 
interfaces. (CQ132724)
Solution:
Configure the port settings individually instead of all at once.
Problem:
When the Mrouter learning mode is changed between "user defined" 
to "auto" and vice-versa, the IGMP Querier election process doesn't start. 
(CQ132805)
Solution:
Disable IGMP Snooping and re-enable again, every time the Mrouter 
learning mode is changed to start the Querier election process.
Problem:
Some WEB GUI pages require full version compatibility of JRE, Browser 
and JRE-Browser applets. For XML compatibility reasons, MSXML DLL Version 6 is 
required for IE browser users. 
Solution:
For download and installation please refer the following link: