Cisco Cisco UCS C240 M3 Rack Server データシート

Cisco UCS C240 M4 High-Density Rack Server (Large Form Factor Disk Drive Model)

CONFIGURING the SERVER

STEP 14

SELECT NIC MODE (OPTIONAL)

By default, the C240 M4 server NIC mode is configured to be Shared LOM Extended. This NIC
mode allows any LOM port or adapter card port to be used to access the Cisco Integrated
Management Controller (CIMC). The Cisco VIC card must be installed in a slot with NCSI support.

To change the default NIC mode to Dedicated, select the UCSC-DLOM-01 PID shown in

Table 26

In Dedicated NIC mode, the CIMC can be accessed only through the dedicated management port.
See

Chassis Rear View, page 7

for the location of the management port.

To change the default NIC mode to Cisco Card Mode, select the UCSC-CCARD-01 PID shown in

Table 26

. In this mode, you can assign an IP address to the CIMC using DHCP and from there you

can fully automate your deployment.

For more details on all the NIC mode settings, see

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/2-0/b_
Cisco_UCS_C-series_GUI_Configuration_Guide_201.pdf

Table 26

Dedicated NIC Mode Ordering Information

Product ID (PID)

PID Description

UCSC-DLOM-01

Dedicated Mode BIOS setting for C-Series Servers

UCSC-CCARD-01

Cisco Card Mode BIOS setting for C-Series Servers