Cisco Cisco UCS C3260 Rack Server データシート

ページ / 86
Cisco UCS Cisco UCS C220 M4 High-Density Rack Server (Large Form Factor Disk Drive Model)
6
BASE SERVER STANDARD CAPABILITIES and FEATURES
BASE SERVER STANDARD CAPABILITIES and FEATURES
 lists the capabilities and features of the base server. Details about how to configure the server for 
a particular feature or capability (for example, number of processors, disk drives, or amount of memory) 
are provided in 
.
Table 1   Capabilities and Features  
Capability/Feature
Description
Chassis
One rack unit (1RU) chassis
CPU
One or two Intel® Xeon E5-2600 v3 or v4 series processor family CPUs
Chipset
Intel® C610 series chipset
Memory
24 slots for DDR4 registered DIMMs (RDIMMs) or load-reduced DIMMs 
(LRDIMMs)
Multi-bit Error 
Protection
This server supports multi-bit error protection.
Embedded NIC 
Two embedded (on the motherboard) Intel i350 GbE ports, supporting the 
following:
Pre-Execution Boot (PXE boot)
iSCSI boot
Checksum and segmentation offload
NIC teaming
Expansion slots
Riser 1 (controlled by CPU 1):
• One full-height profile, 3/4-length slot with x24 connector and x16 
lane
Riser 2 (controlled by CPU 2):
• One half-height profile, half-length slot with x24 connector and x16 
lane, or
Dedicated Cisco 12G SAS Modular RAID controller slot (see 
)
• An internal slot is dedicated for the 12G SAS Modular RAID controller 
card.
Internal storage devices
Drives are installed into front-panel drive bays that provide hot-pluggable 
access.
• Large Form Factor (LFF) drives. Up to four 3.5-inch SAS 
hot-swappable hard disk drives (HDDs)
1
The server also contains one internal USB 3.0 port on the motherboard 
that you can use with a an optional 16 GB USB thumb drive for additional 
storage
UCS Storage Accelerators are also available. These PCIe flash storage 
devices provide independent high-speed storage.