Cisco Cisco UCS C240 M3 Rack Server データシート

Storage controller 

The following RAID options are available:

■

Embedded RAID (3 Gbps) (these implementations of RAID do not 

consume a PCIe slot).

• Embedded SATA-only RAID controller, supporting up to four SATA-only 

drives (RAID 0, 1, 10), or

• ROM5 RAID upgrade, supporting up to eight SAS+SATA drives (RAID 0, 

1, 10), or

• ROM55 RAID upgrade, supporting up to eight SAS+SATA drives (RAID 0, 

1, 5, 10).

■

PCIe RAID controllers (these consume PCIe slots)

• LSI MegaRAID 9270CV-8i with 1 GB Transportable Memory Module 

(TMM) data cache and chassis-mounted (remote) supercap for data 

cache power backup, supporting RAID 0, 1, 5, 6, 10, 50, and 60 and 

up to eight internal SAS+SATA drives.

• LSI MegaRAID 9240-8i RAID 8-port PCIe RAID controller, supporting 

RAID 0, 1, 5, 10, and 50 and up to eight internal SAS+SATA drives.

• LSI MegaRAID 9220-8i RAID 8-port PCIe RAID controller supporting 

RAID 0, 1, and 10 and up to eight internal SAS+SATA drives.

Interfaces 

■

Rear panel

• One DB9 serial port connector
• Four USB 2.0 port connectors
• One DB15 VGA connector
• One 10/100/1000 Ethernet management port
• Two 1 GbE (10/100/1000 Mbps capable) Ethernet LOM ports

■

Front panel

• Two  USB  2.0  ports

Front Panel

■

A front panel controller provides status indications and control buttons

Power subsystem 

One 450 W power supply or one 650 W power supply, depending on server 

configuration and loading. Prior to making a power supply selection, the UCS 

Power Calculator should be run to determine the right size power supply for 

your server configuration. A fully configured C22 M3 server may require the 

650 W power supply. The UCS Power Calculator can be found at the following 

link:

Fans 

Chassis:

■

Five fans for front-to-rear cooling. N + 1 redundant.

Power supply:

■

The power supply is equipped with a fan.