Cisco Cisco UCS C240 M3 Rack Server データシート

 lists the capabilities and features of the base server. Details about how to configure the server for 

a particular feature or capability (for example, number of processors, disk drives, or amount of memory) 
are provided in 

Chassis

Single rack unit (1RU) chassis

CPU

One or two Intel® Xeon E5-2400 v2 or E5-2400 series processor family CPUs

Chipset

Intel C600 chipset

Memory

12 DIMM slots

NIC 

Embedded dual-port Intel I350 PCIe-based Gigabit Ethernet controller

Expansion slots

Two riser cards with one PCIe card slot in each riser

■

Riser 1 (controlled by CPU 1)

• Slot 1: PCIe Gen 3 slot, x16 extended connector (Cisco CNIC), 

half-length, full-height, with NCSI

1

 and Cisco CNIC

2

 support. The 

Cisco 1225 virtual interface card requires an NCSI slot.

■

Riser 2 (controlled by CPU 2)

• Slot 2: PCIe Gen 3 slot, x8 connector, half-length, half-height, no 

NCSI support

Internal storage devices

■

Up to eight 2.5-inch SAS+SATA hot-swappable hard disk drives (HDDs) or 

solid state drives (SSDs)

■

One connector on the motherboard that can accommodate a USB 2.0 

drive. You can order an 8 or 16 GB drive for this connector and use it as 

a hypervisor or license dongle. The 8 or 16 GB USB drive comes blank.

Video

The Emulex Pilot 3 Integrated Baseboard Management Controller provides 
video:

■

Matrox G200e video controller

■

Integrated 2D graphics core with hardware acceleration

■

Supports all display resolutions up to 1920 x 1200 x 16 bpp resolution at 

60 Hz

■

24-bit color depth for all resolutions less than 1600x1200 

■

8 MB video memory