Cisco Cisco Agent Desktop 10.5 インストールガイド
Cisco Agent Desktop Configuration Setup
August 8, 2012
49
5. When you have completed all windows in the tool, click Save on the toolbar or
choose File > Save.
When the data is successfully saved, the program ends automatically.
NOTE: The save process may take several minutes.
Configuring a Secondary Server in a Replicated System
Complete the following procedure if you are running CAD Configuration Setup in Initial
Mode on the secondary server in a replicated system.
Mode on the secondary server in a replicated system.
To enter configuration data in Initial Mode on the secondary Base services computer:
1. Configuration Setup starts automatically and displays the CAD Directory
2. Enter the IP address of the primary Directory Services and then click OK.
A dialog box appears, asking you if you want to set up Directory Services
replication.
replication.
3. Click Yes.
).
Figure 6.
Secondary Directory Services dialog box.
4. Enter the IP address of the secondary Directory Services, and then click OK.
A confirmation dialog box appears, prompting you to indicate whether the
primary and secondary IP addresses are correct.
primary and secondary IP addresses are correct.
5. Click Yes to set up replication.
When replication is done, the Configuration Setup tool appears, with the
CallManager node selected.
CallManager node selected.
6. Complete the fields in each window, using the right arrow on the toolbar to
move forward to the next window.