Cisco Cisco MDS 9000 NX-OS Software Release 6.2
•
m9200-s2ek9-mz-npe.6.2.13.bin
•
m9250-s5ek9-kickstart-mz-npe.6.2.13.bin
•
m9250-s5ek9-mz-npe.6.2.13.bin
•
m9300-s1ek9-kickstart-mz-npe.6.2.13.bin
•
m9300-s1ek9-mz-npe.6.2.13.bin
•
m9500-sf2ek9-kickstart-mz-npe.6.2.13.bin
•
m9500-sf2ek9-mz-npe.6.2.13.bin
•
m9700-sf3ek9-kickstart-mz-npe.6.2.13.bin
•
m9700-sf3ek9-mz-npe.6.2.13.bin
When downloading software, ensure that you select the correct software images for you Cisco MDS 9000 Series switch.
Nondisruptive software upgrades or downgrades between NPE images and non-NPE images are not supported.
Nondisruptive software upgrades or downgrades between NPE images and non-NPE images are not supported.
Upgrading Your Cisco MDS NX-OS Software Image
This section lists the guidelines recommended for upgrading your Cisco MDS NX-OS software image and includes the
following topics:
following topics:
•
•
•
Note
Before you begin the upgrade process, review the list of chassis and modules that Cisco MDS NX-OS
Release 6.2(13) supports. See the
Release 6.2(13) supports. See the
.
For detailed instructions for performing a software upgrade using Cisco DCNM, see the Cisco DCNM Release Notes, Release
6.2, which is available from the following website:
6.2, which is available from the following website:
General Upgrading Guidelines
Follow these general guidelines before performing a software upgrade:
•
Review the nondisruptive upgrade path to Release 6.2(13) in
•
Install and configure dual supervisor modules before the upgrade.
•
Issue the show install all impact upgrade-image CLI command to determine if your upgrade will be nondisruptive.
•
Be aware that some features impact whether an upgrade is disruptive or nondisruptive:
–
Fibre Channel Ports: Fibre Channel ports can be nondisruptively upgraded without affecting traffic on the ports. See
for the nondisruptive upgrade path for all NX-OS and SAN-OS releases.