Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス

To enable MSID-based authentication and access, use the cdma pdsn msid-authentication command 
in global configuration mode. To disable MSID-based authentication and access, use the no form of this 
command.

cdma pdsn msid-authentication [close-session-on-failure] [imsi number] [irm number] [min 

number] [profile-password password] 

MSID authentication is disabled. When enabled, the default values are as follows:

imsi: 5

irm: 4

min: 6

profile-password: cisco

Global Configuration.

Closes the session if authorization fails.

imsi number

(Optional) The number digits from the International Mobile Station 
Identifier (IMSI) that are to be used as the User-Name in the 
Access-Request for MSID authentication. Possible values are 1 to 
15. The default is 5.

irm number

(Optional) International Roaming Mobile Identification Number 
and the identifier used to retrieve the network profile from the 
RADIUS server. Possible values are 1 through 10. The default is 4.

min number

(Optional) Mobile Identification Number and the identifier used to 
retrieve the network profile from the RADIUS server. Possible 
values are 1 through 10. The default is 6.

profile-password password

(Optional) The AAA server access password for MSID-based 
authentication. The default is “cisco”. 

12.1(3)XS

This command was introduced.

12.2(2)XC

The profile-password keyword was added.

12.2(8)ZB1

The close-session-on-failure keyword was added