Cisco Cisco IOS Software Release 12.4(2)XB6 テクニカルリファレンス

To specify the number of times the BWG attempts to re-send R6 messages when it does not receive a 
response from the BS, use the reference-point r6 response retransmits command in base station 
configuration submode. Use the no form of the command to disable this feature.

reference-point r6 response retransmits retransmit value

no reference-point r6 response retransmits

The default value is 5.

Base station configuration submode.

The action taken on the maximum retries being reached depends on the timer that expired.

The following example illustrates the default behavior for the reference-point r6 response retransmits 
command:

Router(bs-config)#reference-point r6 response retransmits 5

Specifies the number of times the AGW attempts to resend R6 messages after 
no response from the BS. The default value is 5.

12.4(15)XL

This command was introduced.