Cisco Cisco IOS Software Release 12.2(27)SBC

To troubleshoot HTTP authentication problems, use the debug ip http authentication command in 
privileged EXEC mode. To disable debugging output, use the no form of this command.

This command has no arguments or keywords.

Privileged EXEC

Use this command to display the authentication method the router attempted and authentication-specific 
status messages.

The following is sample output from the debug ip http authentication command:

Router# debug ip http authentication

Authentication for url ‘/’ ‘/’ level 15 privless ‘/’

Authentication username = ‘local15’ priv-level = 15 auth-type = local

 describes the significant fields shown in the display.

12.2(15)T

This command was introduced.

12.2(31)SB2

This command was integrated into Cisco IOS Release 12.2(31)SB2. 

Authentication for url

Provides information about the URL in different forms. 

Authentication username

Identifies the user.

priv-level

Indicates the user privilege level.

auth-type

Indicates the authentication method.

Displays authentication processes for all HTTP server 
processes on the system. 

Displays the configuration changes that occur during the 
EZ Setup process.