Cisco Cisco IOS Software Release 12.2(58)SE

If you wish to use Device Manager to upgrade the switch from Cisco IOS Release 12.2(35)SE through 
Cisco IOS Release 12.2(40)SE1 (the LAN Base image) to Cisco IOS Release 12.2(50)SE or later (the IP 
base image), you must first upgrade to Cisco IOS Release 12.2(40)SE2.

 lists the filenames for this software release. 

Before upgrading your switch software, make sure that you have archived copies of the current Cisco 
IOS release and the Cisco IOS release to which you are upgrading. You should keep these archived 
images until you have upgraded all devices in the network to the new Cisco IOS image and until you 
have verified that the new Cisco IOS image works properly in your network.

Cisco routinely removes old Cisco IOS versions from Cisco.com. See Product Bulletin 2863 for more 
information:

You can copy the bin software image file on the flash memory to the appropriate TFTP directory on a 
host by using the copy flash: tftp: privileged EXEC command. 

Although you can copy any file on the flash memory to the TFTP server, it is time consuming to copy 
all of the HTML files in the tar file. We recommend that you download the tar file from Cisco.com and 
archive it on an internal host in your network.

You can also configure the switch as a TFTP server to copy files from one switch to another without 
using an external TFTP server by using the tftp-server global configuration command. For more 
information about the tftp-server command, see the “Basic File Transfer Services Commands” section 
of the Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 at this URL:

cbs30x0-ipbase-tar.122-58.se1.tar

Cisco Catalyst Blade Switch 3020 for HP image file and 
device manager files. 
This image has Layer 2+ features.

cbs30x0-ipbasek9-tar.122-58.se1.tar

Cisco Catalyst Blade Switch 3020 for HP cryptographic 
image file and device manager files.
This image has the Kerberos and SSH features.