Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch インストールガイド

reconnect the devices for them to discover their new IP 
addresses from the DHCP server.

Details on how to change the IP address on your computer 

depend upon the type of architecture and operating system you are 
using. See your computer’s local Help and Support functionality 
and search for “IP Addressing.” 

Open a Web browser window. If you are prompted to install an 
Active-X plug-in when connecting to the device, follow the 
prompts to accept the plug-in.

Enter the switch IP address in the address bar and press Enter. For 
example, http://192.168.1.254. 

The Smart Switch Login page

 displays. 

Enter the login information:

Username is cisco 

Default password is cisco (passwords are case sensitive) 

If this is the first time that you have logged on with the default 
username and password, the 

Change Password page opens. Enter 

a new administrator password and then click Apply.

Make sure that any configuration changes that you made are 
saved before exiting from the web-based interface by 
clicking on the Save icon, then clicking Apply. Exiting before 
you save your configuration will result in all changes being 
lost.

The Getting Started window displays. You are now ready to configure the 
switch. Refer to the 

Cisco Small Business Smart Switch Administration 

Guide for further information. 

If you are not using DHCP on your network, set the connection 
type on the smart switch to Static and change the static IP 
address and subnet mask to match your network topology. 

Save your settings.

Return your computer to its original settings.

These tasks can be accomplished by using the procedures in the Cisco 
Small Business Smart Switch Administration Guide.