Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル
Port Management
Configuring PoE
Cisco Small Business SF200E Series Advanced Smart Switch
104
4
•
Partner Timeout—Information from the partner is no longer valid after the
timeout period elapses.
timeout period elapses.
-
Short—Short LACP timeout is 3 times the short periodic timer to
transmit LACP packets. The default Short LACP timeout is 3 seconds.
transmit LACP packets. The default Short LACP timeout is 3 seconds.
-
Long—Long LACP timeout is 3 times the long periodic timer to transmit
LACP packets. The default Long LACP timeout is 90 seconds.
LACP packets. The default Long LACP timeout is 90 seconds.
STEP 3
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
Configuration.
Configuring PoE
On the SF200E-24P switch, ports 1–6 and 13–18 can operate as Power-over-
Ethernet (PoE) power-sourcing equipment (PSE). PSE ports can provide power to
connected PoE Powered Devices (PD).
Ethernet (PoE) power-sourcing equipment (PSE). PSE ports can provide power to
connected PoE Powered Devices (PD).
On switches with PSE ports, the following topics provide information on the
configuration pages available in the Port Management > PoE menu:
configuration pages available in the Port Management > PoE menu:
•
•
NOTE
These configuration pages do not display on switches that do not support PSE
functionality.
functionality.
Configuring PoE Properties
You can use the Properties page to configure whether the switch generates trap
messages under certain conditions and to view current power settings.
messages under certain conditions and to view current power settings.
To configure PoE properties:
STEP 1
Click Port Management > PoE > Properties in the navigating window.
STEP 2
Set the following parameters:
•
Power Trap Threshold—Specify a percentage of total available system
power. When the requested power on PoE ports exceeds the threshold, a
trap is generated to the log.
power. When the requested power on PoE ports exceeds the threshold, a
trap is generated to the log.