Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル
Spanning Tree
MSTP Interface Settings
Cisco Small Business SF200E Series Advanced Smart Switch
137
6
STEP 1
Select the instance and the port/LAG to configure and click Edit.
STEP 2
Specify the following fields:
•
Interface Priority—Select the priority for a particular port within the MST.
The port priority is set in multiples of 16.
The port priority is set in multiples of 16.
•
Path Cost—Specify the port contribution to the root path cost. The path
cost is used to forward traffic when a path is being rerouted. Select Use
Default to set the path cost to the port speed. Or, select User Defined to set
a custom value between 0 and 200,000,000. A value of zero means the path
cost is set according to the port's speed.
cost is used to forward traffic when a path is being rerouted. Select Use
Default to set the path cost to the port speed. Or, select User Defined to set
a custom value between 0 and 200,000,000. A value of zero means the path
cost is set according to the port's speed.
STEP 3
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
Configuration.
The new MSTP configuration appears in the table, along with information about
the spanning tree operation on that port. See
the spanning tree operation on that port. See
for
descriptions of these fields.