Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル

Management Interface

Cisco Small Business SF200E Series Advanced Smart Switch

40

 

Switch management interfaces enable access to the web-based switch 
configuration utility from a management station on the network. The switch 
supports configuration of a management VLAN that segregates the management 
traffic from other traffic on the switch.

The management interface can be configured with an IPv4 address or with an IPv6 
address. The addresses can be configured statically or they can be obtained 
through DHCP/BOOTP servers.

See the following topics for more information on the configuration pages available 
in the Administration > Management Interface menu:

•

•

•

You can use the IPv4 Interface page to configure the management VLAN and IPv4 
address.

To configure the IPv4 management interface:

Click Administration > Management Interface > IPv4 Interface in the navigation 
window.

Select a management VLAN from the list.

A port must be a member of the management VLAN to gain access to the web-
based switch configuration utility. By default, VLAN 1 is configured as the 
management VLAN and all switch ports are configured as members of VLAN 1. 

At least one port must be a member of the management VLAN. The Member Ports 
list displays all current members of the selected management VLAN.

Note that when you change the management VLAN, you must reassign any 
members of the previous management VLAN to the new VLAN to continue their 
management access.