Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル

Enabling Bonjour

Cisco Small Business SF200E Series Advanced Smart Switch

89

 

Bonjour enables the switch and the services enabled by the administrator to be 
discovered by using multicast DNS (mDNS). (Use the Administration > 
Management Services page to enable or disable the switch services.) Bonjour 
advertises switch services to the network and answers queries for the service 
types it supports, simplifying network configuration in small business 
environments. 

Bonjour is enabled by default and runs on the management VLAN. Bonjour 
Discovery can only be enabled globally, not on a per-port or per- VLAN basis. 

The switch advertises the following service types:

•

Cisco-specific device description (csco-sb)—This service enables clients 
to discover Cisco switches and other products deployed in small business 
networks.

•

Management user interfaces—This service identifies the management 
interfaces available on the switch (HTTP, Telnet, and SSH). 

When a Bonjour-enabled switch is attached to a network, any Bonjour client can 
discover and get access to the management interface without prior configuration.

A system administrator can use an installed Internet Explorer plug-in to discover 
the switch. The web-based switch configuration utility shows up as a tab in the 
browser.

When Bonjour Discovery and IGMP are both enabled, the IP Multicast address of 
Bonjour is displayed on the IP Multicast Group Address Page. When Bonjour 
Discovery is disabled, the switch stops service type advertisements and does not 
respond. Bonjour works in both IPv4 and IPv6 networks.

To enable the switch to be discovered through Bonjour:

Click Administration > Discovery - Bonjour in the navigation window.

Select Enable.

Click Apply.