Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル
Administration
LLDP-MED
Cisco Small Business SF200E Series Advanced Smart Switch
93
3
•
Inventory—Hardware and software version information.
•
System Capabilities—Identifies the basic functionality of the switch such
as bridging.
as bridging.
NOTE
The Application Type is included in the Network Policy TLV.
Application types include Voice, Voice Signaling, Guest Voice, Guest Voice
Signaling, Softphone Voice, Video Conferencing, Streaming Video, and
Video Signaling. These Network Policies can be added to interfaces by
using the VLAN Management > Voice and Media > Media VLAN page.
Signaling, Softphone Voice, Video Conferencing, Streaming Video, and
Video Signaling. These Network Policies can be added to interfaces by
using the VLAN Management > Voice and Media > Media VLAN page.
STEP 5
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
Configuration.
NOTE
You can click Configure Network Policy to display the Media VLAN page. (You can
also click VLAN Management > Voice and Media > Media VLAN in the navigation
window.) This page enables you to assign LLDP-MED applications to VLANs and
configure priority settings for associated traffic.
also click VLAN Management > Voice and Media > Media VLAN in the navigation
window.) This page enables you to assign LLDP-MED applications to VLANs and
configure priority settings for associated traffic.
LLDP-MED Port Status Details
The LLDP-MED Port Status Details page displays the LLDP-MED configuration for
all ports on which the feature is enabled. To display this page, click
Administration > Discovery - LLDP-MED > LLDP-MED Port Status Details in
the navigation window.
all ports on which the feature is enabled. To display this page, click
Administration > Discovery - LLDP-MED > LLDP-MED Port Status Details in
the navigation window.
Select a port from the Port list. The Network Policies Table shows the fields for
each service or policy advertised through LLDP:
each service or policy advertised through LLDP:
•
Media Policy Application Type—Type of service, such as Voice, associated
with the LLDP network policy.
with the LLDP network policy.
•
VLAN ID—VLAN ID associated with the network policy.
•
Priority—802.1p class-of-service value associated with the network policy.
•
DSCP—DSCP value for the network policy.
•
Tagged—Network policy is defined for tagged VLANs.
The following switch parameters are advertised in Inventory TLVs.
•
Hardware Revision—Switch hardware revision ID.
•
Firmware Revision—Switch firmware revision number.