Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch メンテナンスマニュアル
Administration
LLDP-MED
Cisco Small Business SF200E Series Advanced Smart Switch
94
3
•
Software Revision—Switch software revision number.
•
Serial Number—Switch serial number.
•
Manufacturer Name—Switch manufacturer name.
•
Model Name—Switch model name.
•
Asset ID—LLDP-MED asset ID for the switch.
The following switch parameters are advertised in System TLVs.
•
Chassis ID—The hardware address of the switch.
•
Chassis ID Subtype—The type of hardware address.
•
System Description—A preconfigured system description.
•
System Name—The user-configured hostname (see the System Settings
page).
page).
•
Management Address SubType—The protocol version for the
management IP address.
management IP address.
•
Management Address—The management interface IP address (see the
IPv4 Interface page or the IPv6 Interface page).
IPv4 Interface page or the IPv6 Interface page).
•
Port ID SubType—The type of the port identifier.
•
Port ID—The port identifier.
•
Port Description—The port description.
•
System Capabilities Enabled—The capabilities that are enabled on the
switch.
switch.
•
System Capabilities Supported—The capabilities that are currently
advertised as supported by the switch.
advertised as supported by the switch.
The following switch parameters are advertised in Location TLVs.
•
Subtype—The supported type of location information (civic, ELIN, or
coordinate-based).
coordinate-based).
•
Coordinates—Switch GPS coordinates in hexadecimal format, if
coordinate-based location information type is used.
coordinate-based location information type is used.
•
ELIN Address—The ELIN number, if this location information type is used.
•
Country—Country where the city is located, if the civic location information
type is used.
type is used.