Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch メンテナンスマニュアル

Common Smartport Tasks

Cisco 300 Series Managed Switches Administration Guide

196

 

This section describes some common tasks to setup Smartport and Auto 
Smartport.

To enable the Auto Smartport feature on the device, open the Smartport > 
Properties page. Set Administrative Auto Smartport to Enable or Enable by Voice 
VLAN.

Select whether the device is to process CDP and/or LLDP advertisements from 
connected devices.

Select which type of devices are to be detected in the Auto Smartport Device 
Detection field.

Click Apply

To enable the Auto Smartport feature on one or more interfaces, open the 
Smartport > Interface Settings page. 

Select the interface, and click Edit. 

Select Auto Smartport in the Smartport Application field.

Check or uncheck Persistent Status if desired.

Click Apply.

To enable the Smartport feature on the interface, open the Smartport > Interface 
Settings page. 

Select the interface, and click Edit. 

Select the Smartport type that is to be assigned to the interface in the Smartport 
Application field.

Set the macro parameters as required.

Click Apply.