Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch
Release Notes for 200, 300, 500, and ESW2 Series Switches Firmware Version 1.3.0
5
Release Notes
Contents
Hardware Versions
The Release 1.3.0 firmware runs on two different versions of hardware for the 200
Series Smart Switches, and the 300 Series Managed Switches. There is a single
version of hardware for the 500and ESW2 series switches. The number of
supported MAC Addresses, Active VLANs, and Multicast Groups will be different
depending on which version of hardware you are using. Refer to the following
table for details:
Series Smart Switches, and the 300 Series Managed Switches. There is a single
version of hardware for the 500and ESW2 series switches. The number of
supported MAC Addresses, Active VLANs, and Multicast Groups will be different
depending on which version of hardware you are using. Refer to the following
table for details:
V1 versus V2 Hardware
Total Number
of MAC
Addresses
of MAC
Addresses
Total Number
of Active
VLANs
of Active
VLANs
Total Number
of Multicast
Groups
of Multicast
Groups
Sx200 in Firmware 1.0.x
HW VID=01
HW VID=01
8K
128
128
Sx200 in Firmware 1.1.x
and above.
HW VID=01
and above.
HW VID=01
8K
256
256
Sx200 in Firmware 1.1.x
and above.
HW VID=02
and above.
HW VID=02
8K
256
256
Sx300 in Firmware 1.0.x
HW VID=01
HW VID=01
8K
256
256
Sx300 in Firmware 1.1.x
and above.
HW VID=01
and above.
HW VID=01
8K
256
256