Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch
2
Release Notes for Cisco Small Business 200E Series Advanced Smart Switches Version 1.0.7.4
Release Notes
Issues Resolved
The following issues were corrected in release 1.0.7.4:
•
Users are unable to use network printing when using MAC IOS.
•
STP based on root path cost does not work correctly.
•
Users must reboot the device for MSTP to work correctly.
•
Users are unable to assign an NAS-IP address as a RADIUS attribute.
Limitations and Restrictions
The following caveats are acknowledged in release 1.0.7.4:
Problem:
The VLAN tag is not stripped for mirrored packets.
Solution:
None. This is a hardware limitation.
Problem:
When there are multiple port mirroring sessions, broadcast and
multicast packets are mirrored twice on the first session, but are not mirrored on the
second session.
second session.
Solution:
None.
Problem:
Users are unable to set the management VLAN via the web GUI and
through CLI.
Solution:
Set the default VLAN instead of the management VLAN. For example,
set VLAN 30 to default VLAN, VLAN Management>Default VLAN Setting>set
Default VLAN to 30 > .Apply.
Default VLAN to 30 > .Apply.
The following caveats are are carried over from release
1.0.6.2:
1.0.6.2:
Problem:
LLDP-MED (applicable to PoE devices) is not fully operational.
Connected devices only show the Remote ID and Remote Port ID.
Solution:
Use CDP, however, LLDP-MED specific data will not be visible.