Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch ユーザーガイド

Thank you for choosing the Cisco 200 Series Smart Switch, a Cisco Small 
Business network communications device. This device is designed to be 
operational right out-of-the-box as a standard bridge. In the default 
configuration, it will forward packets between connecting devices after 
powered up. 

Before you begin installing the switch, make sure you have all of the 
package contents available, access to the 

Cisco Small Business 200 

Series Smart Switch Administration Guide, and a PC with a web browser 
for using web-based system management tools.

• Cisco 200 Series Smart Switch.

• Rackmount Kit.

• Power Cord or Adapter

• This Quick Start Guide.

• Product CD.

This guide will familiarize you with the layout of the smart switch and 
describe how to deploy the device in your network. For additional 
information, see 

.

There are two ways to mount the switch:

• Set the switch on a flat surface.

• Mount the switch in a standard rack (1 rack unit high). 

Do not mount the device in a location where any of the following conditions 
exist:

High Ambient Temperature—The ambient temperature must not 
exceed 104 degrees Fahrenheit (40 degrees Centigrade).

Some switches have a higher temperature rating. The SG200-10FP, 

SF200-24FP, SG200-26FP, and SG200-50FP are rated at 113 degrees 
Fahrenheit (45 degrees Centigrade).

Reduced Air Flow—Both side panels must be unobstructed to prevent 
overheating.