Cisco Cisco Packet Data Gateway (PDG) トラブルシューティングガイド
IPv6 ACL Configuration Mode Commands
deny/permit (any) ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Indicates all packets which match the filter are to be logged.
Indicates all packets will match the filter regardless of source and/or destination.
Usage
Define a catch all rule to place at the end of the list of ru
Important:
It is suggested that any rule which is added to be a catch all should also have the
option
specified. The logged packets may be used to determine if the current list of rules is adequate or needs modification to
ensure proper security. The maximum number of rules that can be configured per ACL varies depending on how the
ACL is to be used. For more information, refer to the Engineering Rules appendix in the System Administration Guide.
ensure proper security. The maximum number of rules that can be configured per ACL varies depending on how the
ACL is to be used. For more information, refer to the Engineering Rules appendix in the System Administration Guide.
Example
The following command defines two rules with the second logging filtered packets:
The following command defines two rules with the second logging filtered packets:
The following sets the insertion point to before the first rule defined above:
The following command sets the insertion point after the second rule defined above:
The following deletes the first rule defined above: