Cisco Cisco Aironet 350 Wireless LAN Client Adapter
4
Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.8 for Windows
OL-15650-01
Important Notes
–
The wired equivalent privacy (WEP) keys of the access points with which your client adapter
will communicate, if your wireless network uses static WEP for security
will communicate, if your wireless network uses static WEP for security
–
The username and password for your network account
–
Protected access credentials (PAC) file if your wireless network uses EAP-FAST authentication
with manual PAC provisioning
with manual PAC provisioning
•
Access points to which your client adapter may attempt to authenticate must use the following
firmware versions or later: 12.00T (340, 350, and 1200 series access points) or Cisco IOS Release
12.2(4)JA (1100 series access points).
firmware versions or later: 12.00T (340, 350, and 1200 series access points) or Cisco IOS Release
12.2(4)JA (1100 series access points).
Note
To use WPA or fast roaming, access points must use Cisco IOS Release 12.2(11)JA or later.
To use radio management (RM), access points must use Cisco IOS Release 12.2(13)JA or
later. To use QoS and WMM, access points must use Cisco IOS Release 12.3(2)JA or later.
To use radio management (RM), access points must use Cisco IOS Release 12.2(13)JA or
later. To use QoS and WMM, access points must use Cisco IOS Release 12.3(2)JA or later.
•
All necessary infrastructure devices such as access points, servers, gateways, and user databases
must be properly configured for any authentication type you plan to enable on the client.
must be properly configured for any authentication type you plan to enable on the client.
Important Notes
PEAP-GTC Authentication Does Not Complete with the 350 Driver
When using the 350 driver for authentication with a unified PEAP-GTC SSID, the user is prompted to
click on toolbar balloon message to authenticate to the network. When the user clicks on the Click here
to select a certifcate or other credentials for connection to the network <SSID name> message, the
balloon goes away, but no prompt is displayed.
click on toolbar balloon message to authenticate to the network. When the user clicks on the Click here
to select a certifcate or other credentials for connection to the network <SSID name> message, the
balloon goes away, but no prompt is displayed.
This issue is a C/A root certificate issue. The server certicate can be a size up to 2048 and use either an
RSA or a DSA signature algorithm. The C/A root certificate must be 1024 or smaller and must use an
RSA signature algorithm. Any certificate that is of a bigger size or that uses a different signature
algorithm causes the 350 to fail.
RSA or a DSA signature algorithm. The C/A root certificate must be 1024 or smaller and must use an
RSA signature algorithm. Any certificate that is of a bigger size or that uses a different signature
algorithm causes the 350 to fail.
Customized Installation Images (Notice to IT Professionals)
Caution
Use caution when bundling the client adapter software into a customized installation image. If the
registry settings are modified, the software may not install and uninstall properly.
registry settings are modified, the software may not install and uninstall properly.