Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

The wired equivalent privacy (WEP) keys of the access points with which your client adapter 
will communicate, if your wireless network uses static WEP for security

The username and password for your network account

Protected access credentials (PAC) file if your wireless network uses EAP-FAST authentication 
with manual PAC provisioning

Access points to which your client adapter may attempt to authenticate must use the following 
firmware versions or later: 12.00T (340, 350, and 1200 series access points) or Cisco IOS Release 
12.2(4)JA (1100 series access points).

To use WPA or fast roaming, access points must use Cisco IOS Release 12.2(11)JA or later. 
To use radio management (RM), access points must use Cisco IOS Release 12.2(13)JA or 
later. To use QoS and WMM, access points must use Cisco IOS Release 12.3(2)JA or later.

All necessary infrastructure devices such as access points, servers, gateways, and user databases 
must be properly configured for any authentication type you plan to enable on the client.

When using the 350 driver for authentication with a unified PEAP-GTC SSID, the user is prompted to 
click on toolbar balloon message to authenticate to the network.  When the user clicks on the Click here 
to select a certifcate or other credentials for connection to the network <SSID name> message, the 
balloon goes away, but no prompt is displayed.

This issue is a C/A root certificate issue. The server certicate can be a size up to 2048 and use either an 
RSA or a DSA signature algorithm. The C/A root certificate must be 1024 or smaller and must use an 
RSA signature algorithm.  Any certificate that is of a bigger size or that uses a different signature 
algorithm causes the 350 to fail.

Use caution when bundling the client adapter software into a customized installation image. If the 
registry settings are modified, the software may not install and uninstall properly.