Cisco Cisco Aironet 350 Wireless LAN Client Adapter
3
Release Notes for Cisco Aironet Client Adapter Firmware, Version 5.02.19
OL-3961-01
New and Changed Information
New and Changed Information
This section describes new and changed information for Cisco Aironet client adapter firmware release
5.02.19.
5.02.19.
Supported Client Adapters
All of the following Cisco Aironet client adapters can use firmware release 5.02.19:
•
340, 350, and 4800 series PC, LM, and PCI cards
•
350 series mini PCI cards
•
PC-Cardbus (CB20A) cards
Firmware Is Upgraded Automatically in Windows
After you install Install Wizard file version 1.0 on a Windows computer, the firmware of any client
adapter that is inserted into that computer may be automatically upgraded to version 5.02.19. Both of the
client adapter’s LEDs light continuously while the firmware upgrade occurs.
adapter that is inserted into that computer may be automatically upgraded to version 5.02.19. Both of the
client adapter’s LEDs light continuously while the firmware upgrade occurs.
Caution
Do not eject the client adapter while the firmware is being upgraded.
Note
If you uncheck the Automatically Load New Firmware When NDIS Driver Is Updated check box
on the ACU Preferences screen, the firmware will not be upgraded when future client adapters are
inserted. However, this option is radio-type and, for PC-Cardbus cards, slot dependent. Therefore, if
you insert a client adapter of a different card type (such as a 340 instead of a 350) or insert the same
PC-Cardbus card into a different slot, the firmware will be upgraded unless you uncheck this
parameter for the new card type.
on the ACU Preferences screen, the firmware will not be upgraded when future client adapters are
inserted. However, this option is radio-type and, for PC-Cardbus cards, slot dependent. Therefore, if
you insert a client adapter of a different card type (such as a 340 instead of a 350) or insert the same
PC-Cardbus card into a different slot, the firmware will be upgraded unless you uncheck this
parameter for the new card type.
Using Client Adapters with Both Windows and Windows CE Devices
If you insert a client adapter that has been upgraded to firmware version 5.02.19 into a Windows CE
device, the adapter functions only if the device is running Windows CE client adapter driver and client
utility version 2.30 or greater.
device, the adapter functions only if the device is running Windows CE client adapter driver and client
utility version 2.30 or greater.