Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

This section describes new and changed information for Cisco Aironet client adapter firmware release 
5.02.19.

All of the following Cisco Aironet client adapters can use firmware release 5.02.19:

340, 350, and 4800 series PC, LM, and PCI cards

350 series mini PCI cards

PC-Cardbus (CB20A) cards

After you install Install Wizard file version 1.0 on a Windows computer, the firmware of any client 
adapter that is inserted into that computer may be automatically upgraded to version 5.02.19. Both of the 
client adapter’s LEDs light continuously while the firmware upgrade occurs.

Do not eject the client adapter while the firmware is being upgraded.

If you uncheck the Automatically Load New Firmware When NDIS Driver Is Updated check box 
on the ACU Preferences screen, the firmware will not be upgraded when future client adapters are 
inserted. However, this option is radio-type and, for PC-Cardbus cards, slot dependent. Therefore, if 
you insert a client adapter of a different card type (such as a 340 instead of a 350) or insert the same 
PC-Cardbus card into a different slot, the firmware will be upgraded unless you uncheck this 
parameter for the new card type.

If you insert a client adapter that has been upgraded to firmware version 5.02.19 into a Windows CE 
device, the adapter functions only if the device is running Windows CE client adapter driver and client 
utility version 2.30 or greater.