Cisco Cisco WAP321 Wireless-N Access Point with Single Point Setup
Release Notes for the Cisco WAP121 and WAP321 Wireless Access Points
13
Release Notes
Open Caveats
Table 6
Open Caveats in Firmware Version 1.0.0.3
Ref Number
Description
CSCtx60443
Symptom:
Captive Portal fails to authenticate WLAN clients if the Captive Portal-enabled VAP
interfaces and the AP management VLAN are assigned different IP subnets while Inter-VLAN
Routing is disabled.
Routing is disabled.
Workaround:
Dedicate a single WAP321 for Captive Portal hotspot service with a different
VLAN subnet network.
Workaround:
Another workaround is to enable Inter-VLAN Routing and apply advanced
access control lists (ACLs) on the connected router, and purposely segregate the AP management
VLAN from other VLANs assigned on Captive Portal-enabled VAP interfaces.
VLAN from other VLANs assigned on Captive Portal-enabled VAP interfaces.
CSCtx68659
Symptom:
Bonjour does not operate at the very first bootup of the WAP321 device. Even though
the Bonjour feature shows enabled on the configuration utility, Bonjour-enabled browsers or Cisco
FindIT cannot access the WAP321 device.
FindIT cannot access the WAP321 device.
Workaround:
Manually reset the WAP321 by pressing the Reset button on the device. Once the
device is rebooted, the Bonjour name can be accessed by Bonjour-enabled browsers or Cisco
FindIT.
FindIT.
CSCtx08343
Symptom:
The DHCP process fails to retrieve a new IP address if the WAP device is in operation
and the LAN cable is moved from one LAN to another.
Workaround:
Reconnect the LAN cable back to old network and click Restart from the web-
based configuration utility. Move the LAN cable immediately to the new LAN network after
clicking Restart.
clicking Restart.
CSCtx04467
Symptom:
When DHCP connectivity is changed to a static IP address, the browser will not
automatically redirect the web-based configuration utility to the new IP address.
Workaround:
Type in the new static IP address into the URL field to login again.
CSCtx04211
Symptom:
In Wireless Settings > Networks > Configuring VAPs if you click HTTP Redirect, but
then unclick it, you are still required to enter Redirect URL data before saving.
Workaround:
Enter a HTTP/HTTPS URL link and click Save. Then click on any sub-menu tree
item from the left of the web-based configuration utility to exit without saving.
CSCtw87635
Symptom:
Enabling Client QoS on SSID1 during WDS Bridge mode will disassociate bridge
connections.
Workaround:
Enable Client QoS on VAP’s other than 0.