Cisco Cisco WAP321 Wireless-N Access Point with Single Point Setup 릴리즈 노트

Release Notes for the Cisco WAP121 and WAP321 Wireless Access Points

Release Notes

Open Caveats

Table 6

Open Caveats in Firmware Version 1.0.0.3

Ref Number

Description

CSCtx60443

Symptom:

Captive Portal fails to authenticate WLAN clients if the Captive Portal-enabled VAP

interfaces and the AP management VLAN are assigned different IP subnets while Inter-VLAN
Routing is disabled.

Workaround:

Dedicate a single WAP321 for Captive Portal hotspot service with a different

VLAN subnet network.

Workaround:

Another workaround is to enable Inter-VLAN Routing and apply advanced

access control lists (ACLs) on the connected router, and purposely segregate the AP management
VLAN from other VLANs assigned on Captive Portal-enabled VAP interfaces.

CSCtx68659

Symptom:

Bonjour does not operate at the very first bootup of the WAP321 device. Even though

the Bonjour feature shows enabled on the configuration utility, Bonjour-enabled browsers or Cisco
FindIT cannot access the WAP321 device.

Workaround:

Manually reset the WAP321 by pressing the Reset button on the device. Once the

device is rebooted, the Bonjour name can be accessed by Bonjour-enabled browsers or Cisco
FindIT.

CSCtx08343

Symptom:

The DHCP process fails to retrieve a new IP address if the WAP device is in operation

and the LAN cable is moved from one LAN to another.

Workaround:

Reconnect the LAN cable back to old network and click Restart from the web-

based configuration utility. Move the LAN cable immediately to the new LAN network after
clicking Restart.

CSCtx04467

Symptom:

When DHCP connectivity is changed to a static IP address, the browser will not

automatically redirect the web-based configuration utility to the new IP address.

Workaround:

Type in the new static IP address into the URL field to login again.

CSCtx04211

Symptom:

In Wireless Settings > Networks > Configuring VAPs if you click HTTP Redirect, but

then unclick it, you are still required to enter Redirect URL data before saving.

Workaround:

Enter a HTTP/HTTPS URL link and click Save. Then click on any sub-menu tree

item from the left of the web-based configuration utility to exit without saving.

CSCtw87635

Symptom:

Enabling Client QoS on SSID1 during WDS Bridge mode will disassociate bridge

connections.

Workaround:

Enable Client QoS on VAP’s other than 0.