Cisco Cisco Catalyst Blade Switch 3020 for HP インストールガイド
7
Follow these steps to install the switch module in the blade server:
Step 1
If you have not already done so, touch the static-protective package that contains the switch
module to an unpainted metal part of the blade server for at least 2 seconds.
module to an unpainted metal part of the blade server for at least 2 seconds.
Step 2
Remove the switch module from its static-protective package.
Step 3
Remove the interconnect blank from the bay where you plan to install the switch module, if
one is present, and install the switch module. (See Figure 3.)
one is present, and install the switch module. (See Figure 3.)
Figure 3
Removing the Interconnect Module Blank from the Blade Server
1
Lever for the interconnect module blank
153142
1