Cisco Cisco Prime Optical 9.6 開発者ガイド
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
289
Name
Value
Description
destinationIsSTSGrooming
True or false
If the value is true, the destination drop point of
the VT or VC circuit is STS groomed for the VAP
the VT or VC circuit is STS groomed for the VAP
circuit.
This attribute is valid only when the
createVTAggregation value is set to true.
sourceIsSTSGrooming and
destinationIsSTSGrooming cannot both be set
to true.
vapDestination
String
You can specify the string (ME name)
representing the VAP destination drop point.
representing the VAP destination drop point.
usePortlessTransmux
True or false
If the value is true, the portless transmux card is
used for the circuit. The NMS provides
used for the circuit. The NMS provides
information for portlessTransmuxMeName,
portlessTransmuxSlot, and
isSourceDS3MappedSTS; otherwise, an INVALID
portlessTransmuxSlot, and
isSourceDS3MappedSTS; otherwise, an INVALID
INPUT exception is thrown.
If the value is false, the portless transmux card is
not used as the intermediate point for the end-
to-end STS-1 circuit.
to-end STS-1 circuit.
portlessTransmuxMeName
String
ME name containing the high-density portless
transmux card, which is used as a circuit
constraint.
constraint.
This attribute is applicable only if
usePortlessTransmux is true.
portlessTransmuxSlot
“/rack=1/shelf=1/slot=[
1..6][12..17]”
NMS provides the physical location of the high-
density portless transmux card.
density portless transmux card.
Information is required up to the slot level.
This attribute is applicable only if
usePortlessTransmux is true.
isSourceDS3MappedSTS
True or false
Indicates whether the source or destination is
DS3 mapped.
This attribute is applicable only if
usePortlessTransmux is true.
vcatMemberId
Integer, 1 to 256
Used for VCAT SNC creation to identify every
VCAT member L1
SNC uniquely. For normal CCAT circuits, this
value is ignored, if specified.