Cisco Cisco Prime Optical 9.6 開発者ガイド
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
290
Name
Value
Description
timeSlotRestriction
Integer, 1 to 192 for
SONET and 1 to 64 for
SDH.
You can select a specific STS/VC-4 when using
autoroute with constraints. The STS/VC-4 is
autoroute with constraints. The STS/VC-4 is
maintained around the ring. If the same STS/VC-4
is not available for the entire circuit route, a
warning message is displayed.
is not available for the entire circuit route, a
warning message is displayed.
includedProtectedME
String
The parameter must match the name of any
ManagedElement which you have requested to
ManagedElement which you have requested to
be included in the protected path of an OCHNC
or OCHCC circuit.
or OCHCC circuit.
For example:
EMS = Cisco Systems/CTM ManagedElement =
myNE
myNE
Add the following parameter to configure a
routing constraint:
routing constraint:
includedProtectedME = myNE
excludedProtectedME
String
Must match the name of any ManagedElement
which you have requested to be excluded from
which you have requested to be excluded from
the protected path of an OCHNC or OCHCC
circuit. See the parameter includedProtectedME
circuit. See the parameter includedProtectedME
for the scenario.
overlayRing
String
Values can be:
•
True—Indicates that an Overlay Ring SNC is
allowed. You can create an Overlay Ring SNC
only by using CTP Inclusions to pass the
complete route from the SNC to the Prime
Optical Server.
•
False—Indicates that an Overlay Ring SNC is
not allowed.
startOdu1
Integer
Number of initial ODUs used by the circuit (for
AR-XP, AR-XPE, and AR-MXP cards).
endOdu1
Integer
Number of final ODUs used by the circuit (for AR-
XP, AR-XPE, and AR-MXP cards).
XP, AR-XPE, and AR-MXP cards).
startTs
Integer
Number of initial time slots in the startOdu
number used by AR-XP and AR-MXP cards. For
AR-XPE, startTs represents Start Odu0.
AR-XPE, startTs represents Start Odu0.
endTs
Integer
Number of final time slot in the endOdu number
used by AR-XP and AR-MXP cards. For AR-XPE,
used by AR-XP and AR-MXP cards. For AR-XPE,
endTs represents End Odu0.