Cisco Cisco Content Delivery Engine 220 インストールガイド
B-4
Cisco Content Delivery Engine 465 Hardware Installation Guide
Appendix B Connector Pin Assignments
Ethernet Connector Pin Assignments
Ethernet Port Connector
The CDEs come with an integrated dual-port Ethernet controller. This controller provides an interface
for connecting to 10-Mbps, 100-Mbps, or 1000-Mbps networks; it provides full-duplex (FDX)
capability, which enables simultaneous transmission and reception of data on the Ethernet LAN.
for connecting to 10-Mbps, 100-Mbps, or 1000-Mbps networks; it provides full-duplex (FDX)
capability, which enables simultaneous transmission and reception of data on the Ethernet LAN.
To access the Ethernet port, connect a Category 3, 4, or 5 unshielded twisted-pair (UTP) cable to the
RJ-45 connector on the back of the device.
RJ-45 connector on the back of the device.
Note
The 100BASE-TX/1000BASE-TX Ethernet standard requires that the cabling in the network be
Category 5 or higher.
Category 5 or higher.
shows the pin number assignments for the Ethernet RJ-45 port.
Figure B-2
RJ-45 Ethernet Port Connector
Table B-5
RJ-45 Crossover Cable Pin Assignments for T568B
RJ-45 Pin
End 1
End 1
Wire Color
Diagram End 1
RJ-45 Pin End 2
1
White/Orange
3
2
Orange
6
3
White/Green
1
4
Blue
7
5
White/Blue
8
6
Green
2
7
White/Brown
4
8
Brown
5
1
8
Speed LED
(green)
Activity LED
(green)
83195