Cisco Headend System Release 2.7 インストールガイド
Chapter 3 Setting Up Hubs, MPEG Sources, MQAM Modulators, PCGs, and SCSs
60
4017650 Rev C
5 When you finish making changes, click Save. The system saves this information
into the DNCS database and updates the illustration so that it shows the
information you entered.
information you entered.
6 Change your network map to reflect these changes.
7 Click Exit. Your next step is to set up the connections between the SCS and its
7 Click Exit. Your next step is to set up the connections between the SCS and its
associated MPEG source. Go to Setting Up SCS Connections (on page 60).
Deleting SCS Ports Modeling Parameters
Important: After you have created and saved SCS Ports, you can delete the SCS
ports. Complete these steps to delete SCS ports.
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
ports. Complete these steps to delete SCS ports.
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click SCS. The SCS Devices window opens.
3 Select an SCS and select one of the following options:
3 Select an SCS and select one of the following options:
Click Ports for selected SCS.
Click Open Selected SCS and then click Maintain Ports.
Result: The SCS <Name of SCS> Ports window opens.
4 Click the Select check box for the port(s) you want to delete. Then click Delete
Selected Ports.
5 The system removes the SCS port information from the DNCS database.
6 Delete the SCS port from your network map.
7 Click Exit.
6 Delete the SCS port from your network map.
7 Click Exit.
Setting Up SCS Connections
After you set up the SCS ports, complete these steps to set up the connections
between the SCS and its associated MPEG source.
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
between the SCS and its associated MPEG source.
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.