Cisco Headend Digital Broadband Delivery System ユーザーガイド
12-4
Power On and Off Options
4002178 Rev C
Supply Power to the AC Outlet on the Set-Top,
Continued
Specifying When Power Is Supplied to the AC Outlet on the Set-Top
To specify whether power is supplied to the AC convenience outlet on the rear panel
of the set-top at all times or only when the set-top is powered on, complete the
following steps.
Note: If you want to allow subscribers to select when power is supplied to the AC
Note: If you want to allow subscribers to select when power is supplied to the AC
convenience outlet on the set-top, see Allowing Subscribers to Specify When
Power Is Supplied to the AC Outlet on the Set-Top, earlier in this section.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears the forefront.
Result: The General Settings tab appears the forefront.
5.
Make sure the option for AC Outlet Control is not selected.
Result: When this field is not selected, subscribers cannot specify when
Result: When this field is not selected, subscribers cannot specify when
power is supplied to the AC outlet on the set-top. Instead, you select when
power is supplied to the outlet for the subscribers.
6.
Select the Base Application tab to select when power is applied to the AC
outlet on the set-top for all subscribers.
Result: The Base Application tab appears in the forefront.
Result: The Base Application tab appears in the forefront.
7.
For the AC Outlet Control field, select one of the following options:
•
•
On means that the AC convenience outlet has power at all times.
•
Switched means that the AC convenience outlet only has power when the
set-top is powered on.
Important: This field appears on this tab only if AC Outlet Control is
disabled on the General Settings tab.
8.
Click Save.
Result: Power is supplied to the AC outlet as you specified in step 7.
Result: Power is supplied to the AC outlet as you specified in step 7.
9.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
10. Click File and Close to close the DHCT Configure prompt.