Cisco Headend System Release 2.7 インストールガイド
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Set Up the loadDhctService for Basic Authentication
4038415 Rev A
119
Set Up the loadDhctService for Basic
Authentication
Complete these instructions as dncs user.
The configuration file for the loadDhctService process is located at:
/dvs/dncs/etc/LoadDhctServerSOAPCfg.cfg. A sample portion of the file follows:
/dvs/dncs/etc/LoadDhctServerSOAPCfg.cfg. A sample portion of the file follows:
# Port on which server listens for incoming requests
SOAP_PORT = 18284
# Enable/Disable SOAP SSL
SSL_MODE = DISABLE
# Enable or Disable basic authentication (parameters:
DISABLE/ENABLE)
DISABLE/ENABLE)
BASIC_AUTH = ENABLE
# Server User Name
SERVER_USER_NAME = dncs
# Server Password
SERVER_PASSWD = dncs123
The following list contains a description of the parameters:
Server_Port (SOAP_PORT) — This is the port on which the loadDhctServer
listens. This is the proxy port in the loadPIMS.https Apache configuration file.
listens. This is the proxy port in the loadPIMS.https Apache configuration file.
SSL_MODE — This should always be set to DISABLE. The SSL is enabled at the
Apache server layer.
Apache server layer.
BASIC_AUTH — Set it to ENABLE.
SERVER_USER_NAME — This configuration parameter defines the user name
used by the loadDhctService web service client to perform basic authentication.
used by the loadDhctService web service client to perform basic authentication.
SERVER_PASSWD — This configuration parameter defines the password to be
used by the client for basic authentication.
used by the client for basic authentication.
1 Launch the DNCS Control processes by clicking Control from the DNCS
Administrative Console Status window.