Cisco Cisco StadiumVision Mobile Reporter
© 2011 Cisco Systems, Inc. All rights reserved.
12 of 26
DMP 4305G
Firmware: 5.1.1; Kernel: Linux version 2.4.22
DMP 4310G Firmware SE 2.2.1 Build 1932
The following caveat applies to firmware SE 2.2.1 Build 1932:
•
The transition between an existing video feed to black is no longer though the overall duration
from the time when the trigger to change is invoked to when the channel is made visible on the
screen is about the same.
from the time when the trigger to change is invoked to when the channel is made visible on the
screen is about the same.
DMP 4310G Firmware SE 2.2.2 Build 2744
Cisco StadiumVision Director Release 2.3.0-78 comes bundled with the build 2744 firmware for the
DMP 4310. This firmware is included for convenience only, and the DMPs are not automatically
upgraded to this new version. However, when the 2.3.0-78 upgrade is applied to SV Director, the
compliance policy is updated in anticipation of the build 2744 DMP upgrade. In order to avoid having
all DMPs appear in the Management Dashboard as being non-complaint, complete 1) or 2) (but not
both) as follows:
DMP 4310. This firmware is included for convenience only, and the DMPs are not automatically
upgraded to this new version. However, when the 2.3.0-78 upgrade is applied to SV Director, the
compliance policy is updated in anticipation of the build 2744 DMP upgrade. In order to avoid having
all DMPs appear in the Management Dashboard as being non-complaint, complete 1) or 2) (but not
both) as follows:
1. In the Management Dashboard, select Director Configuration > Auto Registration Settings
and make the following changes:
•
init.build = Thu Nov 4 00:27:27 PDT 2010 [b1932]
•
init.version = SE 2.2.1
-OR-
2. Upgrade all DMP 4310’s to build 2744.
The recommended action is to upgrade to 2744 but either option will work.
StadiumVision Director Server Requirements
Table 7.
Supported SV Director Servers
Device
Hardware Configuration
Software Release
Current
SV-DIRECTOR-K9 or SV-
PLATFORM2
PLATFORM2
Classic
CADE-2140-K9
Supported Head End Components
The head end components listed in
Release 2.3.
Table 8.
Head End Components
Hardware/Device
Software Release
Cisco D9900 DCM
8.1.86 or later
Cisco D9050 Encoder
V4.00.04