Cisco Cisco StadiumVision Director
26
Release Notes for Cisco StadiumVision Director Release 2.4
Installation Notes
shows how to configure the Assigned VLAN property under the 4310 Settings for DMPs
that are not located on the same VLAN using the “$svd_ignore” string.
You will also need to set this Assigned VLAN property value for the 4310 v5.2.3 Settings:
Figure 12
Assigned VLAN Property Configuration for DMPs
•
There is a new upgrade utility available from the TUI main menu to simplify the upload of upgrade
ISO image files to perform future upgrades of the Cisco StadiumVision Director Release 2.4
software without requiring shell access.
ISO image files to perform future upgrades of the Cisco StadiumVision Director Release 2.4
software without requiring shell access.
Note
The TUI upgrade utility cannot be used to upgrade from Cisco StadiumVision Director
Release 2.3 to Cisco StadiumVision Director Release 2.4. To use the TUI upgrade utility, the
system being upraded must be running Release 2.4.0-147 or later.
Release 2.3 to Cisco StadiumVision Director Release 2.4. To use the TUI upgrade utility, the
system being upraded must be running Release 2.4.0-147 or later.
This section includes the following topics:
•
•
•
Installation and Upgrade Files
Cisco StadiumVision Director Release 2.4 software is available in different types of files based on the
installation or upgrade environment.
installation or upgrade environment.
All file packages include a download package for the image and another for the MD5 checksum. Be sure
to download both applicable packages. The MD5 checksum is used to validate the integrity of the image
package download.
to download both applicable packages. The MD5 checksum is used to validate the integrity of the image
package download.
Note
Be sure to understand your server model (32- or 64-bit) and installation environment so that you are sure
to download the appropriate software packages for your hardware.
to download the appropriate software packages for your hardware.